Right-angle gearboxes

Product description

The CMR Group range is designed for all agricultural machines with bevel gear drive gearboxes, where the power must be transmitted at right-angles. CMR Group can supply the type of casting, gears, dimensions and structural design to suit the application and comply with the technical requirements according to the best possible performance/price ratio. The range includes reducers and increasers, transfer cases and transmissions, speed change gear sets. The range of gearboxes proposed by CMR Group includes the following series: L – T – V – E – S – I – G
Series L15

Series L (Aluminium right-angle gears)

General technical features: cast aluminium for applications that do not require very rigid housings. Up to 21.8HP transmittable power, for different applications.

  • Features
  • Applications
  • Accessories

L11: smallest of the CMR Group range, the only one on the market with transmission ratios other than 1:1, power ratings up to 10.9HP (540 rpm), cast aluminium

Fertilizer spreaders and double-feed fertilizer spreaders

not available

  • Features
  • Applications
  • Accessories

L15: the most popular version on the market, transmission ratio 1:3.25, power ratings up to 16.3HP (540 rpm), cast aluminium

Circular saws/belt saws, fertilizer spreaders and double-feed fertilizer, bales

  • Features
  • Applications
  • Accessories

L11-15-11: transmission ratio 1:1.35, power ratings up to 15HP (540rpm), cast aluminium

Fertilizer spreaders

not available

  • Features
  • Applications
  • Accessories

L15-T18-L15: transmission ratio 1:1.35, power ratings up to 15HP (540rpm), cast aluminium+ G25 cast iron housing

Fertilizer spreaders

not available

Series T18

Series T (Cast iron right-angle gears)

General technical features: G25 or GS400 cast iron housings, for applications that require particularly rigid housings from 5.5HP to 50.3HP (1.000rpm) transmittable power, input speed (max 2.000 rpm) only with max. transmission ratio 1:1, maximum tooth module M8, indicate for almost all agricultural applications. All versions include, dual position for vent plug, dual position for level plug, inner channels for efficient lubrication in all parts of the housing, gearbox fastening points: upper-lower-side, pre-drilled holes in hub for application of extensions.

  • Features
  • Applications
  • Accessories

T18: transmission ratio 1:1, power ratings up to 15HP (540rpm), cast aluminium

Circular saws/belt saws, fertilizer spreaders

not available

  • Features
  • Applications
  • Accessories

T20: transmission ratio 1:1, power ratings up to 50.3HP (1.000rpm), cast iron housing G25 under request available cast iron housing GS400, also with helical gears, free wheel with 3 splines and 9 engaging positions, pump coupling can be applied

Rotary tillers, shredders, fertilizer spreaders

  • Features
  • Applications
  • Accessories

T29: transmission ratio 1:6, power ratings up to 17.7HP (540rpm), cast iron housing G25, also with helical gears

Dusters

not available

  • Features
  • Applications
  • Accessories

T36: transmission ratio 1:1.46, power ratings up to 31.3HP (540rpm), cast iron housing G25 under request available cast iron housing GS400, free wheel with 3 splines and 9 engaging positions

Rotary tillers, shredders

  • Features
  • Applications
  • Accessories

T45: transmission ratio 1:1, power ratings up to 54.4HP (540rpm), cast iron housing G25 under request available cast iron housing GS400, free wheel with 3 splines and 9 engaging positions

Multy-rotary tillers, rotary tillers, bales

  • Features
  • Applications
  • Accessories
  • Features
  • Applications
  • Accessories
  • Features
  • Applications
  • Accessories

T102: transmission ratio 1:1.93, power ratings up to 125.1HP (1.000rpm), cast iron housing GS400, helical gears provided as standard, available with free wheel and double free wheel, both with 3 splines and 9 engaging positions

Shredders

  • Features
  • Applications
  • Accessories

T152: transmission ratio 1:1.57, power ratings up to 291HP (1.000rpm), cast iron housing GS400, helical gears provided as standard, available with free wheel with 4 splines and 12 engaging positions

Rotary harrows, shredders

Series V73

Series V (Vertical gear units)

General technical features: EN-GJL-250/GS400 cast iron housings, max. input speed (540rpm), with transmittable power from 20HP up to 74.8HP, maximum tooth module M6, dual position for vent plug, dual position for level plug, exclusively for vertical-shaft lawn mowers and rotary cutters.

  • Features
  • Applications
  • Accessories

V25: transmission ratio 1:2.83, power ratings up to 20HP (540rpm), cast iron housing EN-GJL-250

Rotary cutters, rotary lawn mowers

not available

  • Features
  • Applications
  • Accessories

V30: transmission ratio 1:2.30, power ratings up to 40HP (540rpm), cast iron housing GS400

Rotary cutters, rotary lawn mowers

not available

  • Features
  • Applications
  • Accessories

V32: transmission ratio 1:2.30, power ratings up to 40HP (540rpm), cast iron housing GS400

Rotary cutters, rotary lawn mowers

not available

  • Features
  • Applications
  • Accessories

V50: transmission ratio 1:3, power ratings up to 44.9HP (540rpm), cast iron housing G25 under request cast iron housing GS400

Rotary cutters, rotary lawn mowers

not available

  • Features
  • Applications
  • Accessories

V53: transmission ratio 1:1.71, power ratings up to 40.1HP (540rpm), cast iron housing GS400

Rotary cutters, rotary lawn mowers

not available

  • Features
  • Applications
  • Accessories

V60: transmission ratio 1:1.93, power ratings up to 59.8HP (540rpm), cast iron housing GS400

Rotary cutters, rotary lawn mowers

not available

  • Features
  • Applications
  • Accessories

V73: transmission ratio 1:1.83, power ratings up to 74.8HP (540rpm), cast iron housing GS400

Rotary cutters, rotary lawn mowers

not available

Series EC130

Series E (Gearboxes for harrows)

General technical features: GS400 cast iron housings, transmission ratio 3.29:1, max. input speed (1.000rpm), with power ratings from 90HP up to 300HP, maximum tooth module M8. All versions include, dual position for level plug, vent plug, inner channels for piloted lubrication. Exclusively designed for rotary tillers.

  • Features
  • Applications
  • Accessories

EC110: transmission ratio 2.93:1, power ratings up to 110HP (1.000rpm), cast iron housing GS400, helical gears provided as standard, input through shaft for seed drill application, base can be turned through 90° for folding harrows, manual speed change gear set

Rotary harrows and folding harrows

not available

  • Features
  • Applications
  • Accessories

EM100: transmission ratio 2.07:1, power ratings up to 90HP (540rpm), cast iron housing GS400, helical gears provided as standard, input through shaft for seed drill application, base can be turned through 90° for folding harrows

Rotary harrows and folding harrows

not available

  • Features
  • Applications
  • Accessories

EC130: transmission ratio 3.20:1, power ratings up to 148HP (1.000rpm), cast iron housing GS400, helical gears provided as standard, input through shaft for seed drill application, base can be turned through 90° for folding harrows, gearbox housing can be set in three positions: right-left-central, set of gears for manual speed change gear set

Rotary harrows and folding harrows

not available

  • Features
  • Applications
  • Accessories

EM130: transmission ratio 2.60:1, power ratings up to 123HP (1.000rpm), cast iron housing GS400, helical gears provided as standard, input through shaft for seed drill application. All versions include, dual position for level plug, vent plug, inner channels for piloted lubrication.

Rotary harrows and folding harrows

not available

  • Features
  • Applications
  • Accessories

EC300: transmission ratio 2.60:1, power ratings up to 300HP (1.000rpm), cast iron housing GS400, helical gears provided as standard

Rotary harrows

not available

Series S12

Series S (Gearboxes for rotary rakes)

General technical features: GS400 cast iron housings, operating torque up to 240 Nm, transmission ratio 9.7:1, max. input speed (540rpm), maximum tooth module M5. Exclusively designed for rotary rakes.

  • Features
  • Applications
  • Accessories

S6: 6-arms assembly, helical gears, transmission ratio 7.14:1, input speed (540 rpm), output maximal torque 312 Nm, cast iron housing GS400

Rotary rakes

not available

  • Features
  • Applications
  • Accessories

S8: 8-arms assembly, helical gears, transmission ratio 7.14:1, input speed (540 rpm), output maximal torque 312 Nm, cast iron housing GS400

Rotary rakes

not available

  • Features
  • Applications
  • Accessories

S9: 9-arms assembly, helical gears, transmission ratio 7.14:1, input speed (540 rpm), output maximal torque 312 Nm, cast iron housing GS400. Specific versions for double machines with rotation to the right and left

Rotary rakes, double rotary rakes

not available

  • Features
  • Applications
  • Accessories

S11: 11-arms assembly, helical gears, transmission ratio 8.55:1, input speed (540 rpm), output maximal torque 312 Nm, cast iron housing GS400. Specific versions for double machines with rotation to the right and left

Rotary rakes, double rotary rakes

not available

  • Features
  • Applications
  • Accessories

S12: 12-arms assembly, helical gears, transmission ratio 8.1:1, input speed (540 rpm), output maximal torque 312 Nm, cast iron housing GS400. Specific versions for double machines with rotation to the right and left

Rotary rakes, double rotary rakes

not available

  • Features
  • Applications
  • Accessories

S13: 13-arms assembly, helical gears, transmission ratio 9.7:1, input speed (540 rpm), output maximal torque 312 Nm, cast iron housing GS400

Rotary rakes

not available

  • Features
  • Applications
  • Accessories

S15: 15-arms assembly, helical gears, transmission ratio 9.7:1, input speed (540 rpm), output maximal torque 312 Nm, cast iron housing GS400

Rotary rakes,

not available

Series I25

Series I (Gearboxes for irrigation systems)

General technical features: G25 cast iron housings, operating torque up to 250 Nm, transmission ratio 631:1, max. input speed (540rpm). Exclusively designed for hose reel irrigators.

  • Features
  • Applications
  • Accessories

I25: gear shift 2/4 speed, transmission ratio 631:1 ÷ 1.307:1, input speed (540rpm), output maximal torque 250 Nm, cast iron housing G25

Hose reel irrigators

not available

Series G18

Series G (Angle reducers)

General technical features: G25/GS400 cast iron housings, operating torque up to 721 Nm, transmission ratio 1.77:1, max. input speed (540rpm). Exclusively designed for rotary tedders

  • Features
  • Applications
  • Accessories

G18: transmission ratio 1.77:1,  input speed 540rpm, output maximal torque 721 Nm, cast iron housing G25

Rotary tedders

not available

  • Features
  • Applications
  • Accessories

G19: transmission ratio 2:1,  input speed 305rpm, output maximal torque 476 Nm, cast iron housing GS400

Rotary tedders

not available

The data shown in the specific product tables are indicative and not binding. CMR Group reserves the right, at any time, to modify them at its own discretion, without any obligation to notify its Customers with a view to continuous improvement of its products and services.

For further information and specific variants, please contact our dedicated offices or consult the GEARBOXES Technical Catalogue.

Do you want more information for these products ?

Fill out the contact form or request a consultation from our Technical Department