Hydraulic gearboxes and crossbars

HYDRAULIC GEARBOXES

H300 in section

Use

To ensure the correct use of the product we recommended to pay attention to the specifications mentioned on our technical sheet. Consider also the input rotation speed, the power input and the transmission ratio. Where the rotation speed or other working conditions are different, please contact CMR Group technical department.

Lubrication

The reducer CMR Group is usually supplied without lubricant. The recommended quantity of lubricant is indicated on our catalogue and the first replaced must be done after 300-400 hours of running, then replaced after 2.000 working hours. The emptying of the gearbox should be made immediately after the working, with still oil hot, in order to avoid the deposition of sludge. Clean the oil plugs. Check frequently the oil level and top up the oil whenever necessary. 

Manure spreader

Series H

General features: GJL 250 and GJS 400 casings, 18NiCrMo4 – 20CrMnTi gears, high quality bearings, 40 Cr and C45 tempered bushings. For further information, consult the technical catalogue or contact the CMR Group Technical Office.

  • Features
  • Applications
  • Accessories

H120: maximum transmission ratio 4: 1, nominal output torque 1,200 Nm, operating temperature -20 ° C / + 80 ° C

Manure spreader

not available

  • Features
  • Applications
  • Accessories

H150: maximum transmission ratio 8.15: 1, nominal output torque 1,500 Nm, operating temperature -20 ° C / + 80 ° C

Manure spreader

not available

  • Features
  • Applications
  • Accessories

H190: maximum transmission ratio 10.2: 1, nominal output torque 1,900 Nm, operating temperature -20 ° C / + 80 ° C

Manure spreader

not available

  • Features
  • Applications
  • Accessories

H200: maximum transmission ratio 16.43: 1, nominal output torque 2,000 Nm, operating temperature -20 ° C / + 80 ° C

 

Manure spreader

not available

  • Features
  • Applications
  • Accessories

H300: maximum transmission ratio 29.5: 1, nominal output torque 3,000 Nm, operating temperature -20 ° C / + 80 ° C

Manure spreader

not available

  • Features
  • Applications
  • Accessories

H350: maximum transmission ratio 12.1: 1 - 24.3: 1, nominal output torque 3,500 Nm, operating temperature -20 ° C / + 80 ° C

Manure spreader

not available

  • Features
  • Applications
  • Accessories

H400: maximum transmission ratio 35.35: 1, nominal output torque 4,000 Nm, operating temperature -20 ° C / + 80 ° C

Manure spreader

not available

  • Features
  • Applications
  • Accessories

H500: maximum transmission ratio 43.6: 1, nominal output torque 5,000 Nm, operating temperature -20 ° C / + 80 ° C

 

Manure spreader

not available

  • Features
  • Applications
  • Accessories

H650: maximum transmission ratio 37.8: 1, nominal output torque 6,500 Nm, operating temperature -20 ° C / + 80 ° C

Manure spreader

not available

  • Features
  • Applications
  • Accessories

H800: maximum transmission ratio 37.7: 1, nominal output torque 8,000 Nm, operating temperature -20 ° C / + 80 ° C

Manure spreader

not available

CROSSBARS

SP02-160 in section

Use

To ensure the correct use of the product we recommended to pay attention to the specifications mentioned on our technical sheet. Consider also the input rotation speed, the power input and the transmission ratio. Where the rotation speed or other working conditions are different, please contact CMR Group technical department.

Lubrication

The reducer CMR Group is usually supplied without lubricant. The recommended quantity of lubricant is indicated on our catalogue and the first replaced must be done after 300-400 hours of running, then replaced after 2.000 working hours. The emptying of the gearbox should be made immediately after the working, with still oil hot, in order to avoid the deposition of sludge. Clean the oil plugs. Check frequently the oil level and top up the oil whenever necessary. 

Manure spreader

Series SP

General features: GJS 400 casings, 18NiCrMo4 – 20CrMnTi gears, 42CrMo4 main shaft, 20CrMnTi input / output shaft. For further information, consult the technical catalogue or contact the CMR Group Technical Office.

  • Features
  • Applications
  • Accessories

S0-55: maximum gear ratio 1.28: 1, power up to 55HP, GJS400 cast iron casting

Manure spreader

not available

  • Features
  • Applications
  • Accessories

SP01-55: maximum gear ratio 1:1, power up to 50HP, GJS400 cast iron casting

Manure spreader

not available

  • Features
  • Applications
  • Accessories

SP02-55: maximum gear ratio 1.63: 1, power up to 55HP, GJS400 cast iron casting

Manure spreader

not available

  • Features
  • Applications
  • Accessories

SP04-55: maximum gear ratio 1: 1, power up to 50HP, GJS400 cast iron casting

Manure spreader

not available

  • Features
  • Applications
  • Accessories

SPC04-55: maximum gear ratio 1: 1, power up to 55HP, GJS400 cast iron casting

Manure spreader

not available

  • Features
  • Applications
  • Accessories

SP02-85: maximum gear ratio 1.38:1, power up to 85HP, GJS400 cast iron casting

Manure spreader

not available

  • Features
  • Applications
  • Accessories

SP02-140: maximum gear ratio 2.39:1, power up to 103HP, maximum gear ratio 2.66:1, power up to 99.5HP, GJS400 cast iron casting

Manure spreader

not available

  • Features
  • Applications
  • Accessories

SP02-160: maximum gear ratio 2.47:1, power up to 160HP, GJS400 cast iron casting

Manure spreader

not available

Do you want more information for these products ?

Fill out the contact form or request a consultation from our Technical Department