CMR has a wide range of components for ground work machinery, including the following:

  • rotary hoes
  • multi-row tillers
  • rotary harrows
  • augers
Zappatrici-multiple

Rotary hoes

The gearbox powered by the PTO shaft, transmits power directly to the chain and/or toothed gears, which in turn move the rotor to which the hoes are attached

  • Gearboxes which can be used for this application: T and F
  • The PTO shaft for this application must be equipped with the disk clutch. We suggest the version with cup springs.

This type of clutch guarantees the minimum overlap of 50mm, between the machine counter-cuff and the cardan shaft cuff, which is an essential feature required by the CE machinery norms

Fresatrici

Multi-row tillers

The gearbox powered by the PTO shaft transmits torque to the tiller via a hexagonal shaft

  • Gearboxes or this application: T series
  • The PTO shaft for this application must be equipped with the disk clutch. We suggest the version with cup springs.

This type of clutch guarantees the minimum overlap of 50mm, between the machine counter-cuff and the cardan shaft cuff, which is an essential feature required by the CE machinery norms

Erpice

Rotary harrows

The gearbox powered by a PTO shaft, is connected directly to the tank driving gear, which in turn, in sequence, drives the other gears, along with the respective supports to which the teeth are attached.

  • Gearboxes for this application: E and T series
  • The PTO shaft intended for this application requires limiter , shear bolt limiters or friction disc clutches, for the latter, the cup spring version is recommended. This type of limiter guarantees the minimum overlap of 50mm, between the machine counter-cuff and the cardan shaft cuff, which is an essential feature required by the CE machinery norms
Trivelle

Augers

The gearbox powered by the PTO shaft directly transmits the torque to the propeller by means of a flanged shaft with a tapered grooved attachment.

  • Gearboxes for this application: T series
  • The PTO shaft intended for this application does not require a shear bolt limiter